General data
General basic values
Speed at maximum performance
Compensation for valve play
Inlet valve play
Setting, Cold engine
0,28
mm
Inlet valve play
Cold engine, Test value
0,23 - 0,33
mm
Outlet valve play
Setting, Cold engine
0,46
mm
Outlet valve play
Cold engine, Test value
0,41 - 0,51
mm
Inlet valve stem diameter
Outlet valve stem diameter
Number of spark plugs/glow plugs required
Compression pressure
9,00 - 12,00
bar
Difference max. 3 bar
Minimum engine oil pressure when idling
0,30 - 0,60
bar
Test temperature 85° C
Maximum deformation of cylinder head
0,050
mm
Rework (resurfacing) of the cylinder head is not allowed.
Minimum cylinder head height
0,00
mm
Cylinder head floating not allowed.
Cooling system
Thermostat opens at temperature
Fuel system
Fuel system in general
Mixture processing designation
System pressure
Low-pressure side
5,00
bar
Exhaust gas test values
General exhaust-gas-relevant values
Exhaust gas recirculation
Diagnostic socket location
Diagnostic socket located in the center console behind a covering.
Minimum engine oil temperature at VET
Brake system
Brake dimensions
Front axle brake disc thickness
with brake disk diameter 266 mm, Internally ventilated brake discs
20,40
mm
Front axle brake disc thickness
with brake disk diameter 266 mm
13,00
mm
Front axle brake disc thickness wear limit
with brake disk diameter 266 mm, Internally ventilated brake discs
18,40
mm
Front axle brake disc thickness wear limit
with brake disk diameter 266 mm
11,00
mm
Maximum lateral run-out of front axle brake disc
Rear axle brake disc thickness
Rear axle brake disc thickness wear limit
Rear axle brake drum diameter
Rear axle brake drum diameter wear limit
Front axle brake lining thickness wear limit
Rear axle brake lining thickness wear limit
Parking brake lining thickness wear limit
Front axle brake disc diameter
Rear axle brake disc diameter
Electrical system
General electrical system
Consumables
Filling quantities and specifications
Engine oil specification
PSA B71 2290|PSA B71 2312
SAE 0W-30|SAE 5W-30
Cooling fluid specification
Original anti-freeze agent
Brake fluid when changing
Brake fluid specification
Air-conditioning system refrigerant
Refrigerant specification
Air-conditioning system oil
Compressor Denso 5SEL12
87
cm³
Air-conditioning system oil
Air-conditioning compressor oil specification
Lighting
Front light sources
Front direction indicator
Rear light sources
Internal light sources
Change intervals
For service data
Engine control toothed belt change interval
every 175.000 km / 10 years
Engine control toothed belt change interval
under heavy service conditions
every 165.000 km / 10 years
Accessory drive belt change interval
every 125.000 km / 6 years
Accessory drive belt change interval
under heavy service conditions
every 120.000 km / 6 years
Accessory drive belt tensioning roller change interval
every 175.000 km / 10 years
Accessory drive belt tensioning roller change interval
under heavy service conditions
every 165.000 km / 10 years
Air filter change interval
every 50.000 km / 4 years
Air filter change interval
under heavy service conditions
every 45.000 km / 4 years
Spark plug change interval
every 50.000 km / 4 years
Spark plug change interval
under heavy service conditions
every 45.000 km / 4 years
Brake fluid change interval
Engine coolant checking interval
first at 125.000 km / 4 years, then every 25.000 km / 1 years
Change the coolant at a pH-value below 6,3.
Engine coolant checking interval
under heavy service conditions
first at 120.000 km / 4 years, then every 15.000 km / 1 years
Change the coolant at a pH-value below 6,3.
Engine oil and filter change interval
every 25.000 km / once a year
Engine oil and filter change interval
under heavy service conditions
every 15.000 km / once a year
Interior filter change interval
every 25.000 km / 2 years
Interior filter change interval
under heavy service conditions
every 15.000 km / once a year
Carry out a test drive
under heavy service conditions
every 60.000 km